Alcatel-Lucent 7705 - Page 397

Filter Policies
7705 SAR OS Router Configuration Guide 397
profile
Syntax profile [profile-id |name] [detail] [association]
Context show>security
Description This command displays NAT profile information.
Parameters profile-id — displays detailed information for the specified profile ID
Values 1 to 65535
name — displays information on the specified profile name
Values 1 to 32 characters (must start with a letter)
detail — displays detailed information on the specified profile ID
association — displays counter information for the specified profile ID
Output The following output is an example of profile information, and Table 60 describes the fields.
Sample Output
*A-ALU-1# show security profile 1 detail
===============================================================================
Security Profile
===============================================================================
Profile Id : 1 Applied : Yes
Name : DEFAULT
Description : Default Session Profile
Timeouts :
TCP Syn-Rcvd : 15 seconds
TCP Transitory : 4 min
TCP Established:2hrs4min
TCP Time-Wait : None
UDP Initial : 15 seconds
UDP Idle : 5 min
UDP DNS : 15 seconds
ICMP Request : 1 min
===============================================================================
*A-ALU-1#
Dest. Port The destination TCP or UDP port number or port range
ICMP Code The ICMP code field in the ICMP header of an IP packet
Session Limit The maximum number of concurrent sessions
Table 59: Show Security Policy Output Fields (Detail) (Continued)
Label Description