Filter Command Reference
378 7705 SAR OS Router Configuration Guide
Sample Output
*A-ALU-49# show filter ip 1 associations
===============================================================================
IP Filter
===============================================================================
Filter Id : 1 Applied : Yes
Scope : Template Def. Action : Drop
Entries : 1
-------------------------------------------------------------------------------
Filter Association : IP
-------------------------------------------------------------------------------
===============================================================================
Filter Match Criteria : IP
-------------------------------------------------------------------------------
Entry : 10
Log Id : n/a
Src. IP : 10.1.1.1/24 Src. Port : None
Dest. IP : 0.0.0.0/0 Dest. Port : None
Protocol : 2 Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
Fragment : Off Option-present : Off
Sampling : Off Int. Sampling : On
IP-Option : 0/0 Multiple Option: Off
TCP-syn : Off TCP-ack : Off
Match action : Drop
Ing. Matches : 0 Egr. Matches : 0
===============================================================================
*A-ALU-49#
*A-ALU-49# show filter ip 1 associations
===============================================================================
IPv6 Filter
===============================================================================
Filter Id : 1 Applied : No
Scope : Template Def. Action : Drop
Entries : 1
Description : (Not Specified)
-------------------------------------------------------------------------------
Filter Association : IPv6
-------------------------------------------------------------------------------
No Match Found
===============================================================================
*A-ALU-49#
TCP-ack Off — the ACK bit is not matched
On — matches the ACK bit being set or reset in the control bits of the
TCP header of an IP packet
Table 48: Show Filter Output Fields (Filter ID Specified) (Continued)
Label Description