IP Router Configuration
7705 SAR OS Router Configuration Guide 117
local-dhcp-server
Syntax [no] local-dhcp-server local-server-name
Context config>router>interface
Description This command associates the interface with a local DHCP server configured on the system.
The no form of the command removes the association of the interface with the local DHCP server.
Default n/a
Parameters local-server-name — the name of the local DHCP server
Values up to 32 alphanumeric characters
local-proxy-arp
Syntax [no] local-proxy-arp
Context config>router>interface
Description This command enables local proxy ARP on the interface.
Local proxy ARP allows the 7705 SAR to respond to ARP requests received on an interface for an IP
address that is part of a subnet assigned to the interface. The router responds to all requests for IP
addresses within the subnet with its own MAC address and forwards all traffic between the hosts in the
subnet.
Local proxy ARP is used on subnets where hosts are prevented from communicating directly.
Default no local-proxy-arp
loopback
Syntax [no] loopback
Context config>router>interface
Description This command configures the interface as a loopback interface.
Default no loopback