IP Router Command Reference
186 7705 SAR OS Router Configuration Guide
Queue Statistics
-------------------------------------------------------------------------------
Egress Queue 1 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out Profile forwarded : 0 0
Out Profile dropped : 0 0
Egress Queue 5 Packets Octets
In Profile forwarded : 0 0
In Profile dropped : 0 0
Out Profile forwarded : 0 0
Out Profile dropped : 0 0
-------------------------------------------------------------------------------
===============================================================================
* indicates that the corresponding row element may have been truncated.
See Table 31 for field descriptions of the show router interface statistics command.
Sample Output (security)
*A-ALU-1# show router interface ies-201-150.1.0.1 security
===============================================================================
Interface Security
===============================================================================
If Name : ies-201-150.1.0.1
Admin Zone : None Oper Zone : None
Bypass : No
Rx V4 Discard Pk*: 0 Rx V4 Discard Byt*: 0
Unsup Proto Pkts: 0 Unsup Proto Bytes: 0
Unsup Svc Pkts : 0 Unsup Svc Bytes : 0
Unsup ICMP Type*: 0 Unsup ICMP Type *: 0
Fragment Pkts : 0 Fragment Bytes : 0
No Session Pkts : 0 No Session Bytes : 0
NAT Rte Loop Pk*: 0 NAT Rte Loop Byt*: 0
Other Discards *: 0 Other Discards B*: 0
-------------------------------------------------------------------------------
Firewall Statistics
-------------------------------------------------------------------------------
Rx Queue CTL Packets Bytes
Forwarded : 0 0
Dropped : 0 0
-------------------------------------------------------------------------------
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A-ALU-1#
See Table 31 for field descriptions of the show router interface security command.
Note: The show command syntax for viewing VPRN interface statistics is show router
router-instance interface [ip-address | ip-int-name] statistics (for example, show router 4
interface “vprn_interface” statistics). The router-instance parameter is not required for
non-VPRN interfaces.