Alcatel-Lucent 7705 - Page 202

IP Router Command Reference
202 7705 SAR OS Router Configuration Guide
dhcp6
Syntax dhcp6
Context clear>router
Description This command enables the context to clear and reset DHCPv6 entities.
statistics
Syntax statistics [ip-int-name | ip-address]
Context clear>router>dhcp
clear>router>dhcp6
Description This command clears statistics for DHCP and DHCPv6 Relay.
If no interface name or IP address is specified, statistics are cleared for all configured interfaces.
If an interface name or IP address is specified, statistics are cleared only for that interface.
Parameters ip-int-name — 32 characters maximum
ip-address — IPv4 or IPv6 address
Values ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
icmp6
Syntax icmp6 all
icmp6 global
icmp6 interface interface-name
Context clear>router
Description This command clears ICMPv6 statistics.
If an interface name is specified, statistics are cleared only for that interface.
Parameters all — all statistics
global — global statistics
interface-name — 32 characters maximum