Alcatel-Lucent 7705 - Page 294

Common Configuration Tasks
294 7705 SAR OS Router Configuration Guide
Example: config>filter# ip-filter 12 create
config>filter# description "IP-filter"
config>filter$ scope template
CLI Syntax: config>filter# ipv6-filter ipv6-filter-id [create]
description description-string
scope {exclusive | template}
default-action {drop | forward}
Example: config>filter# ipv6-filter 10 create
config>filter# description "ipv6-filter"
config>filter# scope template
The following example displays a template filter policy configuration.
A:ALU-7>config>filter# info
----------------------------------------------
...
ip-filter 12 create
description "IP-filter"
scope template
exit
...
----------------------------------------------
A:ALU-7>config>filter#
Use the following CLI syntax to create an exclusive IPv4 or IPv6 filter policy:
CLI Syntax: config>filter# ip-filter filter-id
description description-string
scope {exclusive | template}
default-action {drop | forward}
Example: config>filter# ip-filter 11 create
config>filter# description "filter-main"
config>filter# scope exclusive
CLI Syntax: config>filter# ipv6-filter ipv6-filter-id
description description-string
scope {exclusive | template}
default-action {drop | forward}
Example: config>filter# ipv6-filter 9 create
config>filter# description "ipv6-filter-main"
config>filter# scope exclusive