Filter Command Reference
356 7705 SAR OS Router Configuration Guide
src-ip
Syntax src-ip ipv6-address/prefix-length
no src-ip
Context config>filter>ipv6-filter>entry>match
Description This command configures a source IPv6 address range to be used as an IP filter match criterion.
To match on the source IP address, specify the address and prefix length; for example, 11::12/128.
The no form of the command removes the source IP address match criterion.
Default n/a
Parameters ipv6-address/prefix-length — the IPv6 address on the interface
Values ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
prefix-length 0 to 128
src-mac
Syntax src-mac ieee-address
no src-mac
Context config>filter>mac-filter>entry>match
Description This command configures a source MAC address to be used as a MAC filter match criterion.
The no form of the command removes the source MAC address as the match criterion.
Default no src-mac
Parameters ieee-address — the 48-bit IEEE MAC address to be used as a match criterion
Values xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx, where x is a
hexadecimal digit
To Next Page
Loading...
