Filter Command Reference
360 7705 SAR OS Router Configuration Guide
Parameters profile-id — specifies the ID of the profile group
Values 1 to 65535
name
Syntax name profile-name
no name profile-name
Context config>security>profile
Description This command configures a profile group name.
The no form of the command removes the configured profile group name.
Parameters profile-name — specifies the name of the profile
Values 1 to 32 characters (must start with a letter)
timeouts
Syntax timeouts
Context config>security>profile
Description This command configures session idle timeouts for this policy.
icmp-request
Syntax icmp-request [days days] [hrs hours] [min minutes] [sec seconds]
no icmp-request
Context config>security>profile>timeouts
Description This command sets the timeout for a half-open NAT ICMP session. A half-open NAT ICMP session
is created when an ICMP request is sent but no ICMP response is received.
The no form of the command removes the timeout set for icmp-request.
Default n/a
Parameters days — the timeout in days
Values 1
hours — the timeout in hours
Values 1 to 24
To Next Page
Loading...
