Filter Command Reference
364 7705 SAR OS Router Configuration Guide
Default n/a
Parameters days — the timeout in days
Values 1
hours — the timeout in hours
Values 1 to 24
minutes — the timeout in minutes
Values 1 to 59
seconds — the timeout in seconds
Values 1 to 59
udp-initial
Syntax udp-initial [days days] [hrs hours] [min minutes] [sec seconds]
no udp-initial
Context config>security>profile>timeouts
Description This command configures the timeout applied to a UDP session in its initial state.
The no form of the command removes the udp-initial timeout.
Default n/a
Parameters days — the timeout in days
Values 1
hours — the timeout in hours
Values 1 to 24
minutes — the timeout in minutes
Values 1 to 59
seconds — the timeout in seconds
Values 1 to 59