Filter Policies
7705 SAR OS Router Configuration Guide 385
mac
Syntax mac {mac-filter-id [entry entry-id] [associations | counters]}
Context show>filter
Description This command displays MAC filter information.
Parameters mac-filter-id — displays detailed information for the specified filter ID and its filter entries
Values 1 to 65535
entry entry-id — displays information on the specified filter entry ID for the specified filter ID
Values 1 to 65535
associations — displays information on where the filter policy ID is applied to the detailed filter
policy ID output
counters — displays counter information for the specified filter ID
Output The following outputs are examples of MAC filter information:
• no parameters specified (Sample Output, Table 53)
• mac-filter-id specified (Sample Output, Table 54)
• associations specified (Sample Output, Table 55)
• counters specified (Sample Output, Table 56)
Type The type of filter: CPM, IP, or MAC
FilterID The unique identifier of the filter
EntryID The unique identifier of an entry in the filter table
Log The filter log identifier
Instantiated Specifies if the filter log for this filter entry has been enabled
Table 52: Show Filter Log Bindings (Continued)
Label Description
To Next Page
Loading...
