Filter Policies
7705 SAR OS Router Configuration Guide 393
policy
Syntax policy [policy-id | policy-name] [detail] [association]
policy [policy-id | policy-name] [entry entry-id] [detail] [association]
Context show>security
Description This command displays NAT policy information.
Parameters policy-id — displays detailed information for the specified policy ID
Values 1 to 65535
policy-name — specifies the name of the policy
Values 1 to 32 characters (must start with a letter)
Def. Action Forward — the default action for the filter ID for packets that do not
match the filter entries is to forward
Drop — the default action for the filter ID for packets that do not match
the filter entries is to drop
Entries The number of entries in the filter policy
Description The VLAN filter policy description
Filter Match Criteria:
Entry The filter entry ID. If the filter entry ID indicates that the entry is
(Inactive), then the filter entry is incomplete as no action has been
specified
Description The filter entry description
Match VLAN— the type of match criteria for the entry is VLAN
Untagged — the type of match criteria for the entry is untagged
Action Drop — packets matching the filter entry criteria will be dropped
Forward — packets matching the filter entry criteria will be forwarded
Operation The match criteria operator. Valid operators are: lt (less than), gt
(greater than), eq (equal to), and range (for a range of VLAN IDs).
Vlan-Id The VLAN ID when the match criteria defines a specific VLAN ID
From The start VLAN ID when the match criteria defines a VLAN ID range
To The end VLAN ID when the match criteria defines a VLAN ID range
Table 58: Show Filter VLAN (Filter ID Specified) (Continued)
Label Description
To Next Page
Loading...
