Alcatel-Lucent 7705 - Page 401

Filter Policies
7705 SAR OS Router Configuration Guide 401
Parameters entry-id — displays detailed information for the specified entry ID
Values 1 to 65535
detail — displays detailed information on the zone policy
statistics — displays statistics for the zone policy
Output The following output is an example of zone policy information:
Sample Output
*A-ALU-1# show security zone 1 policy statistics
===============================================================================
Security Zone
===============================================================================
Zone Id : 1 State : Committed
Name : Service Inbound Zone
===============================================================================
===============================================================================
Policy
===============================================================================
Pool Id : 1 Direction : Inbound
Type : source-nat
Name : (Not Specified)
Description : Pool 1:
-------------------------------------------------------------------------------
Entry : 1 Active : yes
Active Matches : 1 Session Limit : Any
Total Matches : 1
Entry : 2 Active : yes
Active Matches : 1 Session Limit : None
Total Matches : 1
-------------------------------------------------------------------------------
Num of Entries : 2
===============================================================================
*A-ALU-1#
session
Syntax session [inbound |outbound] [forward |nat]
session [session-id] [detail]
session [session-id] [statistics]
Context show>security>zone
Description This command displays NAT session information.
Parameters session-id — displays detailed information for the specified session ID
Values 1 to 6144 (7705 SAR-8/7705 SAR-18)
1 to 4096 (7705 SAR-H/7705 SAR-Hc/7705 SAR-Wx)
inbound — displays zone inbound sessions