Route Policy Command Reference
458 7705 SAR OS Router Configuration Guide
Values as-number:comm-val1 — the as-number is the Autonomous
System Number (ASN), where:
as-number: 0 to 65535
comm-val1: 0 to 65535
reg-exp — a regular expression string. Allowed values are any
string up to 256 characters long composed of printable, 7-bit
ASCII characters. If the string contains special characters
(#, $, spaces, etc.), the entire string must be enclosed within
double quotes.
ext-comm — where ext-comm is defined as
type:{ip-address:comm-val1 | as-number:comm-val2}and where:
type: target or origin (keywords that
denote the community as an
extended community of type
route target or route origin,
respectively)
ip-address: a.b.c.d
comm-val1: 0 to 65535
as-number: 0 to 65535
comm-val2: 0 to 4294967295 (as-number and
comm.-val2 allow the same values
as described above for regular
community values)
well-known-comm — one of the keywords no-advertise,
no-export, no-export-subconfed, none
policy-options
Syntax [no] policy-options
Context config>router
Description This command enables the context to configure route policies. Route policies are applied to the routing
protocol.
The no form of the command deletes the route policy configuration.
Default n/a
To Next Page
Loading...
