Route Policy Command Reference
462 7705 SAR OS Router Configuration Guide
Parameters integer — the reuse value, expressed as a decimal integer
Values 1 to 20000
Default 750
suppress
Syntax suppress integer
no suppress
Context config>router>policy-options>damping
Description This command configures the suppression value for the route policy damping profile. This value must
be greater than the reuse value
A route is suppressed when it has flapped frequently enough to increase the Figure of Merit (FoM)
value so that it exceeds the suppress threshold limit. When the FoM value exceeds the suppress
threshold limit, the route is removed from the route table or inclusion in advertisements.
The no form of the command removes the suppress parameter from the damping profile and uses the
value from the default profile.
Default no suppress
Parameters integer — the suppress value expressed as a decimal integer
Values 1 to 20000
Default 3000
To Next Page
Loading...
