Standards and Protocol Support
7705 SAR OS Router Configuration Guide 519
Telecom Standards
ACTA TIA-968-B—Telecommunications - Telephone Terminal Equipment - Technical
Requirements for Connection of Terminal Equipment to the Telephone Network
ANSI/TIA/EIA-232-C—Interface Between Data Terminal Equipment and Data Circuit-
Terminating Equipment Employing Serial Binary Data Interchange
ANSI/TIA/EIA-422-B (RS-422)—Electrical Characteristics of Balanced Voltage Digital
Interface Circuits
AS/ACIF S016 (Australia/New Zealand)—Requirements for Customer Equipment for
connection to hierarchical digital interfaces
ATIS-06000403—Network and Customer Installation Interfaces- DS1 Electrical Interfaces
IC CS-03 Issue 9—Compliance Specification for Terminal Equipment, Terminal Systems,
Network Protection Devices, Connection Arrangements and Hearing Aids
Compatibility
IEEE 802.1ad—IEEE Standard for Local and Metropolitan Area Networks---Virtual Bridged
Local Area Networks
IEEE 802.1ag—Service Layer OAM
IEEE 802.1p/q—VLAN Tagging
IEEE 802.3—10BaseT
IEEE 802.3ab (Ethernet)—Physical Layer Parameters and Specifications for 1000 Mb/s
Operation Over 4-Pair of Category 5 Balanced Copper Cabling, Type 1000BASE-T
IEEE 802.3ah—Ethernet OAM
IEEE 802.3at (PoE)—Data Terminal Equipment Power via the Media Dependent Interfaces
Enhancements
IEEE 802.3u—100BaseTX
IEEE 802.3x —Flow Control
IEEE 802.3z—1000BaseSX/LX
IEEE 802.3-2008—Revised base standard
IEEE 802.1AX-2008—Link Aggregation Task Force (transferred from IEEE 802.3ad)
IEEE C37.94-2002—N Times 64 Kilobit Per Second Optical Fiber Interfaces Between
Teleprotection and Multiplexer Equipment
ITU-T 8262 (Synch E)—Timing characteristics of synchronous Ethernet equipment slave
clock (EEC)
ITU-T G.703—Physical/electrical characteristics of hierarchical digital interfaces
ITU-T G.704—Synchronous frame structures used at 1544, 6312, 2048, 8448 and 44 736
kbit/s hierarchical levels
ITU-T G.707—Network node interface for the Synchronous Digital Hierarchy (SDH)
ITU-T G.712 (E&M)—Transmission performance characteristics of pulse code modulation
channels
ITU-T G.813—Timing characteristics of SDH equipment slave clock (SEC)
To Next Page
Loading...
