Using your telephone
8AL91432ENAD ed01.1 32/94
2.15 Sending DTMF signals
During a conversation you sometimes have to send DTMF signals, such as with a voice server, an
automated attendant or a remotely consulted answering machine.
• During a conversation.
• □MFcode
• Enter DTMF code.
• ■MFcode To deactivate the feature.
The function is automatically cancelled when you hang up.
Depending on the system configuration, the DTMF can be activated by default. In this case, you can
send DTMF code directly by dialing it during the conversation. But if you want to make a second call
during the conversation, you have to deactivate DTMF code before dialing the number.
2.16 Mute, so that your contact cannot hear you
You can hear your contact but he/she cannot hear you:
2.16.1 From the set
• During a conversation.
• Disable microphone. The key is blinking blue.
• Enable microphone. The mute key no longer blinks.
2.16.2 From the headset
• Use the mute key of the headset, if there is one, to disable headset microphone or to resume
the conversation (only available on compatible headsets).
2.17 Forwarding calls to your voice message service
• Select the forward icon (the icon depends on your phone: / ).
• Immediate>VM
Forward is acknowledged (the forward icon becomes animated: / ).
• Go back to the Homepage
To Next Page
Loading...
