Alcatel-Lucent ALE-30 - Making a Second Call During a Conversation; Answering a Second Call During a Conversation

Using your telephone
8AL91432ENAD ed01.1 39/94
2.25 Making a second call during a conversation
Use one of the following:
• Dial directly the number for your call (if DTMF mode is not activated).
• Name of second contact.
• New call → Number of second contact.
• New call → Redial list → Select the N° in the last ten issued.
• New call → Indiv.rep. → Select the programmed key.
• (long press) Or → Menu page → Redial list → Select the N° in the last ten issued.
• → Perso page → Programmed line key.
• The first call is on hold.
2.25.1 Retrieve the call on hold
• You are in conversation with the second contact and the first one is on hold.
• Use one of the following:
o Enquiry off
o Select the tab of the call to retrieve by using left and right navigation keys.
o Hang up, your phone is ringing, then answer the call.
You are in conversation with your first caller again.
If you make an error, hang up: your telephone will ring and you will recover your first call.
2.26 Answering a second call during a conversation
• During a conversation, another person is trying to call you. The name or number of the caller
is displayed for a few seconds.
• Select the incoming call icon (the icon depends on your phone: / ).
• The first call is on hold.
Other method:
• If there are two or more simultaneous incoming calls, select the incoming call icon and press
the following softkey: Answer.
• Queue or Waitqueue → Answer
To return to your first contact and end the conversation in progress:
• Hang up, your phone is ringing, then answer the call.
You are in conversation with your first caller again.
If you make an error, hang up: your telephone will ring and you will recover your first call.