DATA / Shows
A Show includes the current state of the CQ, along with all stored states (Scenes)
and all stored User Libraries. The CQ has one Show loaded at any time, but can
store or recall a show to/from a connected USB drive.
Recall – Replace the current Show (state, Scenes and Libraries) on the CQ with the
stored Show.
Overwrite – Store the current Show in place of the selected Show on the drive.
Store New – Store the current Show as a new Show on the drive.
Rename – Edit the name of the selected Show on the drive.
Delete – Remove the selected Show from the drive.
To Next Page
Loading...
