Need help?Do you have a question about the ALLEN & HEATH CQ-12T and is the answer not in the manual?
General| Brand | ALLEN & HEATH |
|---|---|
| Model | CQ-12T |
| Category | Recording Equipment |
| Language | English |
Crucial safety instructions for operation and warnings.
Details on compatible firmware and app versions.
Step-by-step guide for updating via the app.
Instructions for updating via USB storage.
Details on power supply requirements for CQ units.
Description of mono and stereo mic/line input connectors.
Overview of the CQ-MixPad app interface.
Information about the CQ4You personal monitoring app.
Step-by-step guide for setting preamp gain.
Guide to using Quick Channels for presets.
Guide to using the Feedback Assistant (FBA).
Guide to using FX units in Shared and Inserted modes.
Connecting the mixer to a DAW via USB.
Using an SD card for multitrack recording.
Configuration settings for input channels.
Configuration settings for output channels.
Configuring USB/SD card audio settings.
Bluetooth connection settings and management.
Using Quick Channels for fast channel setup.
Preamp settings including Gain Assistant and Phantom Power.
Gate processing parameters.
Parametric Equalizer settings for inputs.
Compressor processing parameters.
Configuring sends to Main LR, FX, and Outputs.
Graphic Equalizer settings for outputs.
Parametric Equalizer settings for outputs.
Feedback Assistant (FBA) detection settings.
Compressor settings for outputs.
Output level and Limiter settings.
Adjusting send levels to Main LR via faders.
Controlling shared FX units.
Controlling inserted FX units.
Accessing mixer presets via Quick Start.
Stereo recording and playback via USB.
Multitrack recording and playback via SD card.
Checking and updating the unit's firmware.
Performing a factory reset on CQ-12T/18T.
Performing resets on CQ-20B.
To Next Page
