Allen-Bradley Rockwell Automation 1734-AENT User Manua

Publication 1734-UM011A-EN-P - February 2004
Table of Contents ii
Chapter 4
Configure the 1734-AENT for
Direct Connection
in RSLogix 5000
About the Example Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4--1
Set Up the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4--2
Create the Example Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4--3
Configure the I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4--4
Add the Local EtherNet/IP Bridge to the I/O Configuration. 4--4
Add the POINT I/O Adapter to the I/O Configuration. . . . . 4--6
Add the POINT I/O Modules to the I/O Configuration . . . . 4--8
Edit the Controller Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4--13
Create the Ladder Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4--14
Download the Program to the Controller. . . . . . . . . . . . . . . . . . . . 4--15
Verify the Module Chassis Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4--16
Configure the 1734-AENT with Fixed IP Address . . . . . . . . . . . . 4--18
An Overloaded 1734-AENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4--19
Chapter 5
Configure the 1734-AENT for
Direct Connection and
Rack Optimization
in RSLogix 5000
What’s in This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5--1
Set Up the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5--2
Create the Example Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5--3
Configure the I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5--4
Add the Local EtherNet/IP Bridge to the I/O Configuration. 5--4
Add the POINT I/O Adapter to the I/O Configuration. . . . . 5--6
Add the POINT I/O Module and Configure
For Direct Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5--8
Add the POINT I/O Module and Configure
For Rack Optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5--11
Download the Program to the Controller. . . . . . . . . . . . . . . . . . . . 5--12
Verify the Module Chassis Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5--13
Access Module Data via the 1734-AENT Adapter . . . . . . . . . . . . 5--16
Chapter 6
LED Status Indicators
Interpret the Status Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6--1
Chapter 7
Safety Approvals
and Specifications
Safety Approvals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7--1
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7--2

Allen-Bradley Rockwell Automation 1734-AENT Specifications

General

Model	1734-AENT
Category	Network Hardware
Type	EtherNet/IP Adapter
Ethernet Ports	2
IP Addressing	Static or DHCP
Network Address	Configurable via software
Mounting	DIN rail
Number of Ports	2
Port Type	RJ45
Communication Protocol	EtherNet/IP
Manufacturer	Rockwell Automation
Power Supply	24V DC
Enclosure	Open-style