1 Publication 1734-UM011A-EN-P - February 2004
Preface
What this Preface Contains
This preface describes how to use this manual. The following table lists where
to find specific information within this chapter.
Who Should Use
This Manual
This manual is intended for control engineers and technicians who are
installing, configuring, and maintaining an EtherNet/IP control system that
communicates with POINT I/O through a 1734-AENT adapter. We assume
you have a good understanding of Ethernet and the TCP/IP protocol.
Common Techniques
Used in This Manual
The following conventions are used throughout this manual:
• Numbered lists provide sequential steps.
• Bulleted lists provide information, not procedural steps.
• Information in bold text identifies menu windows, screen options,
screen names, or areas of the screen, such as dialog boxes, status bars,
radio buttons, and parameters.
For information about See page
Who Should Use This Manual P-1
Common Techniques Used in This Manual P-1
How To Use This Manual P-2
About the Example Applications P-2
System Components P-3
Where to Find More Information P-4
Terminology P-6
ATTENTION
You must use Series C POINT I/O modules with the
1734-AENT adapter. Series A or B POINT I/O
modules will not work with this adapter.
The screen captures shown in this manual are pictures
of the software’s actual screens.
To Next Page
Loading...
Need help?
General
