Allen-Bradley Rockwell Automation 1734-AENT User Manua

Publication 1734-UM011A-EN-P - February 2004
Configure the RSLinx Ethernet Communication Driver B-3
You will be prompted to name the driver.
5. Select the default driver name (e.g., AB_ETH-1) or type in your own
name and click on OK.
The Configure driver window will appear with the Station Mapping
page open.
6. Click on Add New and enter the IP address or Host Name of your
Ethernet device (e.g., 10.88.70.4, “Pump1”, etc.).
7. Repeat step 6 for each additional Ethernet device you need to access.
8. When you are done entering the IP addresses, click on Apply. Then click
on OK to close the Configure driver window.

Allen-Bradley Rockwell Automation 1734-AENT Specifications

General

Model	1734-AENT
Category	Network Hardware
Type	EtherNet/IP Adapter
Ethernet Ports	2
IP Addressing	Static or DHCP
Network Address	Configurable via software
Mounting	DIN rail
Number of Ports	2
Port Type	RJ45
Communication Protocol	EtherNet/IP
Manufacturer	Rockwell Automation
Power Supply	24V DC
Enclosure	Open-style