• Disabling (blocking) of programs.
• Optional functions.
• Type of displaying the program information.
Entering and Changing Values Utilizing
the Control Keypad
Entering a Numeric Value
1. Use the navigation buttons LEFT and RIGHT and choose the
position which you want to enter (change).
2. Use the CANCEL THE SELECTION button and enter the re-
quired value.
3. Use the START button to confirm the entered value.
EXAMPLE: How to Enter the Number "264":
1. Use the RIGHT button to move the cursor into the position of
the digit for single units.
2. Use the CANCEL THE SELECTION button and set the digit
to "4".
3. Use the LEFT button to move the cursor into the position of
the digit for tens
4. Use the CANCEL THE SELECTION button and set the digit
to "6".
5. Use the LEFT button to move the cursor into the position of
the digit for hundreds.
6. Use the CANCEL THE SELECTION button and set the digit
to "2".
7. Use the START button to finish the process of entering the
value.
Entering a Logical Value and Selection from a List
1. Use the hidden navigation buttons LEFT and RIGHT to enter
(change) a logical value or to select an item from a list.
2. Use the START button to confirm the entered value.
How to Get into the Setup Mode
1. Press the buttons LEFT and CANCEL THE SELECTION at
the same time.
2. Release the LEFT button and then, after one second, release
the CANCEL THE SELECTION button.
3. The display shows Service Info.
Figure 4
4. Press the buttons LEFT and RIGHT at the same time.
5. The display shows the main menu. If the password has been
activated, you will have to enter the correct password first.
CFD1344R_SVG
To Program Mode
Password
Figure 5
How to Leave a Setup Mode
When the "Main Menu" screen is shown.
1. Press the CANCEL THE SELECTION button on the keypad.
2. Then you will return to “Run Mode“ and the program over-
view is shown.
Basic Description of Controls
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
14 Part No. D1676ENR11
To Next Page
Loading...
