Alliance Laundry Systems PA20 X CONTROL - Selection of Payment Mode; Selection of Additional Functions

Payment Menu
Display Mes-
sage Default Information Limits
...
Enable Pr15 Yes
Optional Functions Prewash Selection of additional functions. Refer to Selection of Additional
Functions.
No / Prewash
Delayed Start No The delayed start function enables to carry out a start delay of a select-
ed wash cycle. The maximum time delay is 24 hours.
Yes/No
Show Start Info No Selection whether a prompt to start a program shall be displayed after
making payment.
Only for payment mode = Coins and external.
Yes/No
Show Prog Nr No The selection of program information display type in the main program
menu
No
Number
Temperature
Number + tem-
perature
Show Prog Time Yes Selection whether the time information of selected program should be
displayed.
Yes/No
Show soap info No Selection whether the dosage information during program selection
should be displayed.
Yes/No
Show Error Details No Selection, whether detailed information on the error shall be shown on
the display.
Yes/No
Exit Return to Main Menu
Table 15
Selection of Payment Mode
No : Machine without a payment system (OPL).
Coin : Machine with a coin drop (including electronic. Refer to
Electronic Coin Selector.
External : External payment unit that operates with free contacts
(relay).
Comm1 : External payment unit that operates directly through
Network Communication.
Comm2 : External payment unit that operates directly through
Network Communication.
CRD : Card based central payment system connected to the pro-
grammer via free contacts.
ECB : Electronic coin selector equipped with the blocking (disa-
bling) function.
Debit : Card reader.
The CRD selection enables to connect a central card payment
system to the programmer. It is a special application and a con-
sultation with the manufacturer is necessary.
The ECB selection is designated for connection of blocking (dis-
abling) of the electronic coin selector coil to the programmer of
the washing machine. If a wash program is running or if the ma-
chine is in a failure state, the coin drop will not accept coins. For
connecting the coil to the programmer see the electrical wiring
diagram.
Selection of Additional Functions
One additional function may be selected from the Additional
Functions menu. This additional function may be activated (se-
lected) by the washing machine user (customer) during the proc-
ess of wash program selection.
Initializing the Machine
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
42 Part No. D1676ENR11