Alliance Laundry Systems PA20 X CONTROL - Toolbox Menu

Faults Menu (Service Faults)
Display Message Information
View Fault Statist …
1 No Drain 0x
…
The Fault Statistics are an accumulation of Error messages that have ap-
peared over a long period. With this information the technician has an indica-
tion on which parts an intervention should be needed.
(the statistics are reset by the "Reset Service Counts" menu item in the tool-
box menu)
The List with Statistics :
• No Drain : E2 + E37
• Door Switch : E6 + E7 + E8 + E9
• No Fill : E11 + E40
• No Heating : E13 + E14
• Temp Sensor : E25
• Level Sensor : E24
• Safety switch : E3
• Invert Com : E27
• Invert Alarm : E26 + E28 + E29 + E72 + E73 + E74 + E75
• Invert OV Alarm : E303 + E304 + E305
Table 54
Toolbox Menu
The purpose of the Toolbox Menu is to give support at technical
interventions.
Toolbox Menu
Display Message Information
View Input States ?
1 Input 1 On
…
20 Input 20 Off
The Input states for Input 1, …, Input 20.
The exact function of the inputs can be found on the electrical drawing of the
washing machine programmer.
• If the Input state is Off, the Input signal is low.
• If the input state is On, the Input signal is high.
Table 55 continues...
Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
86 Part No. D1676ENR11