NOTE: For a spray sequence, if a supply has been pro-
grammed, the sequence time corresponds with the pro-
grammed supply time.
Signal
• The signal should be programmed when a running wash cycle
has to be interrupted.
• The Buzzer will be activated to alert the operator.
• For most cases, the operator interrupts a program to fill the
soap box an additional time.
• The program interruption will always occur at the end of a
step.
Basic Description of Controls
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
26 Part No. D1676ENR11
To Next Page
Loading...
