1. Strict Temperature Control
2. Temperature Calibration Offset
3. Water temperature
4. Target Temperature Calibration
5. Target Temperature Calibration: +9°F or +5°C
6. Target Temperature Calibration: -9°F or -5°C
7. Time
8. Offset adjustment
9. Normal Temperature Control
10. Strict Temperature Control
Figure 13
Temperature Calibration Offset
The temperature sensor of the washing machine can be calibrated
with an external temperature measurement device as reference.
The temperature sensor value can be adjusted in a range of +9°F
or +5°C and -9°F or -5°C.
For normal washing machine use such calibration is not required.
Hygienic Cycle Menu
Display Mes-
sage Default Information Limits
Strict Temp. Con-
trol
No Strict Temperature Control ensures that the fabrics are washed at same
value as the programmed target temperature.
No / Yes
Temp. Calib. Offset 0 By changing the Temperature Calibration Offset value the water tem-
perature sensor value is adjusted so that it gets equal with the value of
an external reference temperature sensor.
+9°F or +5°C
-9°F or -5°C
Hygienic Water
Level
No This option activates the mode of more accurate checks of the required
water level during the washing procedure.
No / Yes
Exit Return to Advanced Menu.
Table 10
Program Mode Lock Menu
The access to the Program Mode can be locked by a password. It
means that without password you can't have access to the Main
Menu Screen.
Initializing the Machine
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
37 Part No. D1676ENR11
To Next Page
Loading...
