EasyManua.ls Logo

Alliance Laundry Systems PA20 X CONTROL - The Prewash Sequence

Alliance Laundry Systems PA20 X CONTROL
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wash
Cooldown
Rinse
Extra Rinse
Final Rinse
Soak
Spray
No wash
For a new step, as a default, the first displayed function is the
Wash sequence.
Now by pressing the buttons LEFT or RIGHT, you can select
the desired sequence.
Press the ENTER button to confirm.
You can also use the ARROW DOWN button if you accept
the pre-programmed default value.
The Prewash Sequence
Prewash
Wash
Cooldown
Rinse
Extra Rinse
Final Rinse
Soak
Spray
No wash
The Prewash Sequence
Display Mes-
sage Default Information Limits
Temperature 104° F [40°C] The water temperature. 33.8 - 113 °F [1 -
45 °C]
Inlet I1 – I5
(104 °F
[40°C] )
The suggested inlet valves are related to the temperature and the soap
box to be used.
NOTE: If you insert other inlet valves than the suggested
ones, problems can occur at the water fill process.
I1...I8
Level Normal Low The suggested water level depends on the machine Type. Refer to Table 6
RPM - The suggested RPM depends on the machine Type. Refer to Table 7
Detergents
Menu…
Supply 1, …, 8
0 seconds Time selection for external liquid soap supplies. You can program up
to 4 supplies at the same time. If you have programmed more then 4
supplies an error message will be generated. Put the time of the sup-
plies back to zero until not more than 4 non-zero time values are re-
maining.
(Liquid soap supplies must be switched on at the configuration Menu)
0 - 99 seconds
On Time 12 seconds The wash action (motor "On" Time). Gentle wash action : 3 seconds.
(The suggested default values can be adjusted at the Initialization
menu)
1 - 99 seconds
Off Time 3 seconds The wash action (motor "Off" Time). Gentle wash action : 12 sec-
onds.
(The suggested default values can be adjusted at the Initialization
menu)
1 - 99 seconds
Time 4.0 minutes The Prewash Sequence Time.
(for 0 Minutes the Prewash sequence will be skipped) (programmable
in steps of 0.5 Minutes)
0 - 99.5 minutes
Table 24  continues...
Programming
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
51 Part No. D1676ENR11

Table of Contents

Other manuals for Alliance Laundry Systems PA20 X CONTROL

Related product manuals