Figure 9
• Press the ENTER button to make your selection.
• For the Configuration Menu a password is required.
CFD1395R_SVG
Configuration Menu
Password
Figure 10
Passwords
• Insert 264 for North American models, starting software ver-
sion 772.215.0 and press the ENTER button.
• For entering numerical values refer to chapter Entering and
Changing Values Utilizing the Control Keypad.
• Now you will see the first menu item.
• By pressing the ARROW DOWN or UP button you can se-
lect the menu items one by one.
Configuration Menu
Display Mes-
sage Default Information Limits
Machine Type
Are You Sure ?
XXXX
No
Select the right machine type.
• Look at Machine Name Plate at the rear of the washing machine.
• Confirm selection of the machine type.
NOTE: Reset Defaults must (only) be executed for each new
installed wash Computer and after selecting a new machine
type. This will ensure correct EEPROM memory configura-
tion (just by selecting another machine type the default set-
tings are not reloaded).
NOTE: By changing the machine type the wash programs
kept in EEPROM memory are not changed. After changing
the wash machine type it's recommended to erase the pro-
gram memory and load the standard wash programs again
as the wash program settings differ for each machine type.
NOTE: Make sure that you have selected the correct ma-
chine type. There is only one correct setting for machine
type. If the wrong machine type was selected, replace the
display board or send it to the factory for repair.
List
No / Yes
Table 9 continues...
Initializing the Machine
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
32 Part No. D1676ENR11
To Next Page
Loading...
