How to Handle Power Interruptions
Refer to Installation/Operation/Maintenance manual.
Special Functions
Service Information
Move into the SERVICE INFORMATION if you want to inspect
the actual water temperature and level. Refer to How to Get into
the Setup Mode.
• At the Service Information you can inspect:
• The water temperature and water level.
• The number of cycles that have been accumulated (service
due).
• The actual wash machine states at the running wash cycle.
• By pressing the ARROW DOWN button you will see all the
menu items.
Program or Coin Selector Counter
1. Move to the SERVICE INFORMATION. Refer to How to Get
into the Setup Mode.
2. Press the navigation arrow DOWN to move into the screen
with counters.
• Vended machines: The coin selector counter is shown.
• OPL machines: The program counter is shown.
Resetting the Counters to Zero:
The service cycle counter can be reset to zero in the Service
Menu / Tools / Resetting the cycle counter. To reset the coin se-
lector counter, press the hidden navigation button RIGHT three
times.
External Liquid Soap Boxes
• If the washing machine is connected with external soap
pumps, a signal from the soap supply reservoir can be con-
nected to the washing machine computer.
• If the Soap box is almost empty, then the diagnostic message
"Err 39 out of soap" will be shown on the display of the Wash
Computer.
• So the operator does not have to check the soap supply reser-
voirs continuously to avoid washing without soap.
Operation Menu
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
66 Part No. D1676ENR11
To Next Page
Loading...
