Alliance Laundry Systems PA20 X CONTROL - The no Drain Sequence; The Static Drain Sequence; The Reversing Drain Sequence

The No Drain Sequence
• Drain
• Extract
• No Drain
• Static Drain
• Reversing Drain
The Drain/Extraction part of the programmed step is skipped.
WARNING
For some specific functions "No Drain" must be pro-
grammed. Example: If you want to program a cool-
down sequence, then "No Drain" must be program-
med between the hot wash and the cooldown se-
quence.
C050
The No Drain Sequence
Display Mes-
sage Default Information Limits
Exit Return to Edit Program Menu.
Table 34
The Static Drain Sequence
• Drain
• Extract
• No Drain
• Static Drain
• Reversing Drain
The drum is at standstill while the water is drained.
The Static Drain Sequence
Display Mes-
sage Default Information Limits
Drain Valve 1 Only available on washing machines with both : a normal Open and
normal Closed Drain valve.
1 - 2
RPM - The suggested RPM depends on the machine Type. Refer to Table 7
Time 0.5 minutes The Static Drain Sequence Time..
(for 0 Minutes the Static Drain sequence will be skipped) (program-
mable in steps of 0.5 Minutes)
0 - 15.0 minutes
Exit Return to Edit Program Menu.
Table 35
WARNING
It’s not recommended to program a spin sequence
just after a static drain sequence. At a static drain
sequence, the garments are not distributed around
the drum while the water is drained. When the spin
sequence starts, the garments are a big imbalance
and the imbalance (tilt) function will be activated.
C051
The Reversing Drain Sequence
• Drain
• Extract
• No Drain
• Static Drain
• Reversing Drain
The drum is reversing while the water is drained.
Programming
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
61 Part No. D1676ENR11