Program Functions
Display Message Information
Name: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The Program Name gives information about the type of wash Program.
With the hidden navigation buttons LEFT and RIGHT you can select the
character position.
With the ARROW UP and DOWN button you can select the desired charac-
ter.
By pressing the ENTER button, the dashes will disappear.
View In Program View you can look to the Program Settings, without making any
changes.
Edit Editing a program is changing the program by selecting a new element from a
list or by changing values in an existing program. You can also add, insert or
delete steps in an existing program.
New To create a new program, you have to make use of the add step function. By
adding steps the program will grow step by step. A confirmation is asked first
to delete the old program.
Copy
Copy From Program Number: XXX
Sometimes it's easier to make a copy of an existing program and to make
some small changes to the copied program. Insert the desired program num-
ber from which you want to copy the program. A confirmation is asked first
to delete the old program.
Delete a Program To get rid of an existing program, use the delete program function. The com-
plete program will be erased at once. A confirmation is asked first to delete
the old program.
Exit Return to Main Menu
Table 22
Step 3: Program Step Function
Figure 19
Programming
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
48 Part No. D1676ENR11
To Next Page
Loading...
