Weighing Menu
Display Mes-
sage Default Information Limits
Weighing Statis-
tics…
To display a sub-menu with statistics of the weighed values. No / Yes
Service Test Value Auxiliary servicing value.
Exit Return to Advanced Menu
Table 13
Data EXPORT / IMPORT
Data EXPORT / IMPORT
Display Mes-
sage Default Information Limits
Programs Export No All wash programs and washer settings are copied from the control
board internal memory onto a USB flash disk. (The USB flash disk
must be inserted in the USB connector).
No / Yes
Programs Import No All wash programs are copied from USB flash disk into the control
board internal memory. (The USB flash disk must be inserted in the
USB connector). Wash programs can only be copied into the washer
from the same model of washer (i.e. from 6.5 kg / 14 lb / 65 L machine
into another 6.5 kg / 14 lb / 65 L machine).
No / Yes
Conf. Import No Settings of the machine are copied from USB flash disk into the control
board internal memory. (The USB flash disk must be inserted in the
USB connector). Settings can only be copied into the washer from the
same model of washer (i.e. from 6.5 kg / 14 lb / 65 L machine into an-
other 6.5 kg / 14 lb / 65 L machine).
No / Yes
Exit Return to Advanced Menu.
Table 14
Payment Menu
The payment menu serves the purpose of setting the payment
mode of the machine, values of coins, prices of programs and op-
tional special functions.
How to Get into the Payment Menu
The Payment Menu can only be accessed when the machine is in
the standby state (the power is switched on, but no program is
started).
• The program overview is shown.
• Switch the machine into the setup mode. Refer to section How
to Get into the Setup Mode.
• The main menu is now available.
• In the configuration menu select the Payment Menu.
Figure 14
Initializing the Machine
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
40 Part No. D1676ENR11
To Next Page
Loading...
