• Turn the washing machine to the setup mode. Refer to section
How to Get into the Setup Mode.
• The Main menu is now available.
• Press the ARROW DOWN button to select the Service menu.
• Select the Diagnostic Program menu at the Service menu.
Diagnostic Prog …
Service menu
CFD1438R_SVG
Figure 32
• Select diagnostic program.
Program
Diagnostic Cycle
CFD1439R_SVG
Exit
No
Figure 33
• Press START if you want to start the diagnostic program.
Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
88 Part No. D1676ENR11
To Next Page
Loading...
