ALLIANCE SCL020WT - Setup Command Error E D 01

Setup Command Error E d 01
NOTE: The machine configuration is set at power up. If a change has been made, the machine must be powered
down and up again.
Power down, power up
and try again. Is the
correct inverter
installed in the
machine?
Power machine down.
Are there any loose
connections?
Yes
Verify the correct
size and voltage
inverter is installed.
No
Check the L7S check
dipswitchs are set
for the correct
capacity.
No
Repair connections
and power machine
back on.
Yes
Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
122 Part No. F8677701EN