EasyManua.ls Logo

ALLIANCE SCL020WT - Operator Safety Guidelines

ALLIANCE SCL020WT
157 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operator Safety
WARNING
NEVER insert hands or objects into basket until it
has completely stopped. Doing so could result in se-
rious injury.
SW012
Machines referred to by model in this manual are intended to be
used by the general public in applications such as:
staff areas in shops, offices, kitchens and other working envi-
ronments
by clients in hotels, motels and other residential type environ-
ments
areas for communal use in blocks of flats or in launderettes
any other similar applications
Installation of these machines must fully conform to the instruc-
tions contained in this manual.
The following maintenance checks must be performed daily:
1. Verify that all warning labels are present and legible, replace
as necessary.
2. Check door interlock before starting operation of the ma-
chine:
a. Attempt to start the machine with the door open. The ma-
chine should not start.
b. Close the door without locking it and start the machine.
The machine should not start.
c. Attempt to open the door while a cycle is in progress. The
door should not open.
If the door lock and interlock are not functioning properly, dis-
connect power and call a service technician.
3. Do not attempt to operate the machine if any of the following
conditions are present:
a. The door does not remain securely locked during the en-
tire cycle.
b. Excessively high water level is evident.
c. Machine is not connected to a properly grounded circuit.
Do not bypass any safety devices in the machine.
WARNING
Operating the machine with severe out-of-balance
loads could result in personal injury and serious
equipment damage.
W728
Safety Information
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
7 Part No. F8677701EN

Table of Contents

Related product manuals