Page 42
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
• Timeout for Reply — Defines the time interval in seconds that passes before the connection between the
device and the RADUIUS server times out. The field range is 1-60 seconds and the default is 10 seconds.
• Dead Time — Defines the amount of time (in minutes) that a RADIUS server is bypassed for service
requests. The range is 0-2000. The default is 0 minutes.
• Key String — Defines the default key string used for authenticating and encrypting all RADIUS-
communications between the device and the RADIUS server. This key must match the RADIUS encryption.
• Usage Type— Specifies the RADIUS server authentication type. The default value is All. The possible field
values are:
– Log in — Indicates the RADIUS server is used for authenticating user name and passwords.
– 802.1X — Indicates the RADIUS server is used for 802.1X authentication.
– All — Indicates the RADIUS server is used for authenticating user names and passwords, and 802.1X
port authentication.
2. Click Create. The Add RADIUS Page opens.
Figure 23: Add RADIUS Page
3. Define the fields.
4. Click Apply. The RADIUS profile is saved, and the device is updated.
To Next Page
Loading...
Need help?
General
