EasyManua.ls Logo

ALTAI C1N - Page 66

ALTAI C1N
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
thus prevents the types of attacks that compromised WEP; while AES provide stronger
data protection than TKIP. WPA2 is a security standard that aims to replace WPA. AES
is the only option in cipher mode in WPA2 security. If AP is configured with WPA-auto
authentication, it supports clients using either WPA or WPA2 authentication, AES+TKIP
is the only option in cipher mode in WPA-auto security.
WPA-Enterprise (WPA) or WPA2-Enterprise (WPA2) is designed for enterprise networks
and requires a RADIUS authentication server. This requires a more complicated setup,
but provides additional security.
Figure 5-30 WPA/WPA2/WPA-auto
WLAN Security Setting
Authentication Mode: WPA, WPA2 or WPA-auto.
Cipher Mode: Specify data encryption scheme; there are 3 options: “TKIP”, AES”,
and “TKIP + AES”. AES is the only option in cipher mode in WPA2 security. TKIP causes
bad performance on 802.11n network.

Table of Contents

Other manuals for ALTAI C1N

Related product manuals