Contents | xiii
Special Warnings and Information
Equipment Used in Class I, Division 2 Hazardous Locations
Refer to Chapter 2 – Specifications for details about the suitability of this equipment in hazard-
ous locations.
EXPLOSION HAZARD – DO NOT DISCONNECT EQUIPMENT UNLESS POWER
HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS.
Risque d’explosion – Avant de déconnecter l’équipement, coupez le courant où vous assurez
que l’emplacement est designé non dangereux.
All input and output wiring must be in accordance with Class I, Division 2 wiring methods
(CEC 18-152) and in accordance with the authority having jurisdiction.
!
Avertissement
!
WARNING
To Next Page
Loading...
Need help?
General
