Overview | 1-7
Supplemental Information – Where Can I Find It?
Some analyzers are configured with optional equipment, that may require
supplementary information. The analyzer Operator’s Guide and this ad-
ditional information (not part of the main manual) – collectively known
as the Documentation Package – is included on the Documentation Package
CD shipped with the analyzer.
If a hard copy of the analyzer Operator’s Guide is ordered, the addi-
tional information will be located in the “Supplemental Information”
section of the manual. Refer to Chapter 7 for ordering information.
The Documentation Package (CD or hard copy) shipped with each analyzer
includes:
• The “Manual” folder (CD only) contains the main analyzer Operator’s
Guide and any other manuals for standalone equipment that supports
the analyzer.
• The “Supplemental Information” folder (CD only) or section (in
the analyzer Operator’s Guide) can include documents called Manual
Supplements that describe and illustrate installation, operation, layout,
and maintenance procedures for non-standard or optional equipment
that make up your analyzer and its sample system.
Manual Supplements are typically used for non-standard Measuring
Cells* or optional equipment*, non-standard (derivative) analyzer
models, or information that is intended to replace similar information
in the Operator’s Guide. (*These documents can also include a non-
standard Spare Parts List or a separate Custom Spare Parts List.)
This folder can also contain:
- Analyzer Programming Parameters sheet, which lists the critical ana-
lyzer operating parameters.
- EEPROM Data Sheets, which list the factory-default configuration
settings of all programmable analyzer parameters.
- Signed Final QC (Quality Control) Document, which includes
AMETEK Testing Quality Control information for the analyzer.
- Final As-Built drawings (if ordered) which are customer-specific
drawings for the analyzer system. Note that these drawings are not
typically included with standard-built analyzers.
- Other customer-specific information may also be included (if ap-
plicable), such as Product Data Sheets, a Custom Spare Parts list, or
analyzer Certificates.

NOTE
To Next Page
Loading...
Need help?
General
