xiv | Model 933S UV Analyzer
EU Declaration of Conformity
PN 903-8595 Rev N
EU Declaration of Conformity
Manufacturer’s Name: AMETEK Canada
A Division of AMETEK Process & Analytical Instruments
(ISO 9001:2008 Registered)
Manufacturer’s Address: 2876 Sunridge Way N.E.
Calgary, Alberta, Canada T1Y 7H9
Phone: (403) 235-8400 / Fax: (403) 248-3550
EU Representative Address: AMETEK Precision Instruments Europe GmbH
Rudolf-Diesel-Str. 16
D-40670 Meerbusch, Germany
Phone: 49-2159 91 36 0 / Fax: 49-2159 91 36 80
Declare under our sole responsibility that the products:
Product Names: Model 93x-Series Photometric Analyzers
Model Numbers: 931/932/933/934
Marking: II 2 G Ex db IIB+H
2
T3 Gb or
II 2 G Ex db IIB+H
2
T3 or
II 2 G Ex db IIB T3 Gb or
II 2 G Ex db IIB T3
Conform to the following EU Standards and Directives:
Electromagnetic Compatibility Directive 2014/30/EU using the following standards:
EN 61326-1 Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 1: General requirements.
EN 55011 (CISPR 55011) Radiated Electromagnetic Emissions, Class A 30 MHz to 1 GHz.
EN 55011 (CISPR 55011) Conducted Electromagnetic Emissions, Class A.
EN61000-3-2 Limitsforharmoniccurrentemissions(equipmentinputcurrent≤16Aperphase).
EN61000-3-3 Limitationofvoltagechanges,voltageuctuationsandickerinpubliclow-voltagesupply
systems,forequipmentwithratedcurrent≤16Aperphaseandnotsubjecttoconditional
connection.
EN 61000-4-2 Testing and measurement techniques – Electrostatic discharge immunity test.
EN61000-4-3 Testingandmeasurementtechniques–Radiated,radio-frequency,electromagneticeld
immunity test.
EN 61000-4-4 Testing and measurement techniques – Electrical fast transient/burst immunity test.
EN 61000-4-5 Testing and measurement techniques – Surge immunity test.
EN 61000-4-6 Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-
frequencyelds.
EN61000-4-8 Testingandmeasurementtechniques–Powerfrequencymagneticeldimmunitytest.
EN 61000-4-11 Testing and measurement techniques – Voltage dips, short interruptions and voltage variations
immunity tests.
Restriction of Hazardous Substances Directive 2011/65/EU (RoHS 2).
Low Voltage Directive 2014/35/EU using the following standards:
EN 61010-1 Safety requirements for electrical equipment for measurement, control, and
laboratory use – Part 1: General requirements.
Pressure Equipment Directive 2014/68/EU
Article 4, Paragraph 3
Page 1 of 2
Canada
A DIVISION OF AMETEK PROCESS & ANALYTICAL INSTRUMENTS
Western Research