3-24 | Model 933S UV Analyzer
3. Click Next to continue. The Ready to Install screen will appear.
Or, to review or change your installation settings, click Back.
To begin the installation, click Install. The Installing AMETEK S93XS
Configurator Version #.# screen appears, displaying the installation
Status. After the installation is complete, the Completing the AMETEK
S93XS Configurator Setup Wizard screen appears. Click Finish to exit
the Setup Wizard. Remove the DVD from the DVD drive.
If the software prompts you to restart your computer, click No.
The software will create a S93xs shortcut icon on the desktop to start
the software.
You can also start the software by clicking the S93xs icon from the
Start\All Programs\AMETEK S93XS Configurator menu.
For details about using the Configurator Software to communicate
with the analyzer, refer to “Starting the Configurator Software and
Establishing Communication Between the Analyzer and Computer”
in Chapter 4.
NOTE
Figure 3-9.
Completing the
AMETEK Congurator
Setup Wizard screen.