Page 37
EVACU ELITE
INSTALLATION, COMMISSIONING AND USER MANUAL
On the Zone Settings screen, activate
the control to turn the test tone on
and off. The volume of the test tone is
adjusted by the associated slider
control.
5.4.7 Test Condition
There is a facility to test all emergency zones. Refer to section 5.1.4
When in the test condition, indications are unaffected.
The emergency zone TEST indicators are illuminated steady. Refer to section 5.1.12
The system wide test indicator is illuminated steady (see section 5.3.9)
Activate the TEST control
The main screen has been updated, to
show all emergency zones in the test
condition, and the TEST indicator is
illuminated steady.
The EWS can now be placed in the
manual mode, and all call or individual
emergency zone controls activated, with
ONLY the indication affected.
No audio or visual signals are broadcast
in the test condition.
To Next Page
Loading...
