EasyManua.ls Logo

Ampac EvacU Elite - Purpose; Scope; References; Evacu ELITE System Manuals

Ampac EvacU Elite
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 2
EVACU ELITE
INSTALLATION, COMMISSIONING AND USER MANUAL
2 Purpose
This manual is a user guide to the Ampac EvacU
ELITE
, to assist personnel in the installation,
commissioning and operation of the EvacU
ELITE
.
2.1 Scope
The information within this manual is only available to and for the use of personnel engaged in the
installation, commissioning and operation of the EvacU
ELITE
.
It is assumed the user of this manual is familiar with the operation of EWCIE and EICIE as required
by the relevant product standards (AS 4428.4 and AS 4428.16).
The terminology used in this manual is consistent with the terminology used in the product standards.
2.2 References
2.2.1 EvacU
ELITE
System Manuals:
MAN3136-1 EvacU
ELITE
User Manual
MAN3137-1 EvacU
ELITE
Install, Commissioning and User Manual
MANxxxs-x EvacU
ELITE
Consultant Specification
MAN3142-1 EvacU
ELITE
Programming Manual
2.2.2 Australian Standards
AS 4428.4 Fire Detection, Warning, Control and Intercom Systems Control and
indicating Equipment. Part 4: Emergency intercom control and indicating
equipment
AS 4428.16 Fire Detection, Warning, Control and Intercom Systems Control and
indicating Equipment Part 16: Emergency warning control and indicating
equipment
AS 7240.4 Fire detection and alarm systems Part 4 Power supply equipment
AS 1670.4 Fire Detection, Warning, Control and Intercom Systems System Design,
Installation and Commissioning. Part 4: Emergency warning and intercom
systems
To comply with AS 7240.4, the EvacU ELITE power supply equipment has been assessed to AS/NZS
60950.1 Information technology equipment Safety, Part 1 General requirements.
The EvacU ELITE also complies with IEC 62368-1 Audio / video, information and communication technology
equipment Part 1 Safety requirements.
IEC 62368 has replaced IEC 60950 as the safety standard is some overseas countries, and as EvacU ELITE
will be sold overseas, approval to both safety standards is required.
Refer to section 7.8 for guidelines on selecting batteries to adhere to the IEC 62368 requirements.

Table of Contents

Related product manuals