2-23 Coverage Mapping (Option 431) Spectrum Analyzer
2-36 PN: 10580-00349 Rev. H Spectrum Analyzer MG
The Auto Save Full selection generates a scroll list that displays the amplitude of each
frequency point measured for the segment. A JPG image of the segment is displayed in the
HTML file. The image is also saved as a separate JPG file, which is listed at the bottom of the
segment table and labeled Screen Shot. See Figure 2-21.
2-23 Coverage Mapping (Option 431)
To initiate Coverage Mapping, press the Shift key followed by the Measure (4) key, then press
the Coverage Mapping submenu key. For a description of Coverage Mapping, refer to
Chapter 6, “Coverage Mapping (Option 431)”.
Figure 2-21. Spurious Emission Mask Segment Data - Auto Save Full
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
