Chapter 7 Verifying the Instrument Performance
Analyzing the TaqMan
®
RNase P Plate Data
98 Applied Biosystems 7300/7500/7500 Fast Real-Time PCR System Installation and Maintenance Guide
Notes
Unloading the Plate
PHYSICAL INJURY
HAZARD. During instrument operation, the sample
block can be heated to 100 °C. Before performing the
following procedure, be sure to wait until the sample
block reaches room temperature.
1. Remove the RNase P plate:
a. Press the tray to open it.
b. Remove the RNase P plate.
c. Press the tray to move it into the instrument.
2. Discard the plate.
To Next Page
Loading...
