C.14 Option 32/33: Internal NTP Server – Obsoleted by Opt34 137
numbers are fixed to the values defined in RFC-37 and RFC-123 respectively. If the authentication
option is enabled, up to seven MD5 or DES keys can be entered (key numbers 1 . . . 7). All key
input must be done in hexadecimal format; MD5 key length is limited to eight characters.
When leaving the setup mode after selecting function 9 all parameters are stored in a nonvolatile
memory and the NTP server resets. Select 8 to exit without saving modifications.
To Next Page
Loading...
