Arbiter Systems 1092A User Manual

C.15 Option 34: NTP/PTP Server 161
GPS Status and Time Quality
This web interface page displays basic GPS satellite information and time quality. Select this page
to view Time Quality, Satellite information and Leap Seconds accumulated and pending, as shown
in Figure C.36.
ARBITER
SYSTEMS
Option 34 Network Time Module
NTP
PTP
SNMP
[Clock]
Network
System
Support
Logout
Computer Name (or IP address) – ssh – 80x24
09 May 2013 12:49:17 PDT
Time Quality : Locked
Satellites Tracked : 10
Satellites Visible : 10
Leap Seconds
Current GPS-UTC Offset: 16
Status : Not pending
Figure C.36: View Operation Using SSH
SNMP Status
Use the cursor keys to select SNMP, then Status and press ENTER to view the SNMP status as
illustrated in Figure C.37.
[Status] Configure
SNMP Service : Enabled (Running)
SNMP Traps : Enabled
ARBITER
SYSTEMS
Option 34 Network Time Module
NTP
PTP
SNMP
Clock
Network
[System]
Support
Logout
Computer Name (or IP address) – ssh – 80x24
Figure C.37: View SNMP Operation Using SSH
Configure SNMP
Please use the Web Interface to configure SNMP. See Section C.15.3 for more instructions.

Arbiter Systems 1092A Specifications

General

Brand	Arbiter Systems
Model	1092A
Category	Measuring Instruments
Language	English