SBC-GX1 Technical Manual Introduction
Handling your board safely
Anti-static handling
This board contains CMOS devices that could be damaged in the event of static
electricity discharged through them. At all times, please observe anti-static precautions
when handling the board. This includes storing the board in appropriate anti-static
packaging and wearing a wrist strap when handling the board.
Battery
The board contains a Lithium non-rechargeable battery. Do not short circuit the battery
or place on a metal surface where the battery terminals could be shorted. During
shipment the battery is isolated from the boards circuitry and should be connected
before using the board, please refer to the link section of this manual for details.
When disposing of the board or battery, take appropriate care. Do not incinerate, crush
or otherwise damage the battery.
Packaging
Please ensure that should a board need to be returned to Arcom, it is adequately
packed, preferably in the original packing material.
Electromagnetic compatibility (EMC)
The SBC-GX1 is classified as a component with regard to the European Community
EMC regulations and it is the users responsibility to ensure that systems using the
board are compliant with the appropriate EMC standards.
© 2004 Arcom Issue D 11
To Next Page
Loading...
Need help?
General
