SBC-GX1 Technical Manual General Software Embedded BIOS 2000
General Software Embedded BIOS 2000
If you require support for Windows CE.NET or Windows XP Embedded, the SBC-GX1
can be supplied with a General Software Embedded BIOS 2000.
This section explains how to use the CMOS Setup Utility to modify the General
Software Embedded BIOS 2000 configuration.
To launch the CMOS Setup Utility:
1 Turn on the computer. The Power On Self Test (POST) routine then starts. A short
while into this routine the following message is displayed:
Press DEL to enter SETUP
2 Press either the Del key or the Ctrl, Alt, and Esc keys simultaneously.
If the message disappears before you respond and you still wish to enter setup,
restart the computer to try again by pressing the ‘reset’ button, turning it off and
back on, or pressing the Ctrl, Alt, and Del keys simultaneously.
© 2004 Arcom Issue D 42
To Next Page
Loading...
Need help?
General
